Available Materials

5052 vs 6061 aluminum comparison covering properties, machinability, forming, welding, corrosion resistance, finishing, tolerances, and applications.

Metals for CNC machining guide covering common alloys and machining specialized materials, with selection, tolerances, finishing, inspection, and sourcing advice.

Custom Monel turning and screw machining of parts in special alloys require controlled tooling, chip breaking, threads, tolerances, inspection, and traceability.

Carbon steel machining services for 1018, 1045, and A36 parts, covering CNC processes, tolerances, heat treatment, finishes, inspection, and applications.

A practical DAXIN guide explaining 3-axis CNC limitations on complex parts, including tool access, long-tool chatter, repeated setups, datum transfer error, undercuts, deep cavities, curved surfaces, and hidden cost.

A practical DAXIN guide explaining why 5-axis CNC cost can be lower than traditional machining when fewer setups, shorter tools, simpler fixtures, less inspection, lower scrap, and better repeatability reduce total part cost.

A practical DAXIN guide explaining when parts really need 5-axis CNC machining, covering complex geometry, multi-side features, one-setup accuracy, short tools, undercuts, cost, tolerances, and when 3-axis machining is enough.

A practical DAXIN guide explaining why black anodizing defects are more visible than clear anodizing, covering machining marks, scratches, alloy variation, pretreatment, dye absorption, sealing, tolerance, and buyer inspection standards.

A practical DAXIN guide explaining why prototype CNC parts pass inspection but mass production fails, covering fixtures, tool wear, material variation, tolerance stack-up, inspection plans, surface finish, and production readiness.

A practical DAXIN guide explaining why small CNC parts cost more than buyers expect, covering setup time, tiny tools, handling, inspection, tolerances, deburring, scrap risk, and batch quantity.